Posted by: Cory_ Hendricks on July 01, 2003 at 20:29:20

: : I have an eblade on a 02 body, pro paintball valve, square lug, when I put the velocity above 230 it will cock but won't fire like the valve is not opening. anyone have this similiar problem, under 230 the gun works fine. I have the eblade set up on the slow factory setting. : Check the battery Thanks that works, I fiqured the battery was ok since it was only half way on the guage.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : : I have an eblade on a 02 body, pro paintball valve, square lug, when I put the velocity above 230 it will cock but won't fire like the valve is not opening. anyone have this similiar problem, under 230 the gun works fine. I have the eblade set up on the slow factory setting. : : Check the battery : : Thanks that works, I fiqured the battery was ok since it was only half way on the guage. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]