paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Autococker / Minicocker

Re: low pressure and high pressure tanks

In Reply to: low pressure and high pressure tanks posted by Daniel on July 20, 2003 at 13:26:11:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Posted by:
BodyByHostess
on July 21, 2003 at 10:19:38

 As far as low pressure fixed (400-450psi) vs high pressure fixed (800-850psi), choose the high pressure. Your inline reg will have no problem regulating 850psi down to your operating pressure. 450psi, while adequate for your 2K3 cocker, is not high enough for consistant output on many guns when shooting rapidly. The additional pressure will allow your reg to recharge faster.

Follow Ups:

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.