|
|
|
Thanks
In Reply to: Shocktech posted by Razorpb on September 29, 2003 at 14:37:54:
|
Posted by: Dale "Head_Hunters" DuPont on October 02, 2003 at 17:07:48
|
: They use that rounded sear in their Phat hammer, ANS makes the inverted cone.
The Smart Parts roller sear is already rounded and I have to put in the stiffest sear return spring in that I have to get it to work properly. Less than that and the sear lug will bounce over the sear at some frequency during higher rates of fire. A REAL Pain in the Wazooh! If I move up to a heavier hammer spring I have the SAME problem. Probably needing an even heavier sear return spring to hold it... Ever experience anything simular guys? |
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |