Posted by: n0|2m4L on August 08, 2003 at 23:16:34

here's the deal: every time i take out my banjo bolt, the middle o-ring is torn. with it torn, it takes a screwdriver to pry it out, as the torn o-ring wedges between the bolt and body. what's worse, is having to wrestle that o-ring back on. any of you who have/had an old RT understand my pain (and also why agd took out the banjo bolt on the newer RT's). anyways, i've been tuning the lvl-10 bolt, and i don't think my fingers can take many more o-ring replacements. if any of you have had this problem, or a suggestion as to why it keeps happening, any input is greatly appreciated. thanks in advance!

Follow Ups: Re: shredded banjo bolt o-ring on RT PigTech 12:44:40 08/19/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : here's the deal: every time i take out my banjo bolt, the middle o-ring is torn. with it torn, it takes a screwdriver to pry it out, as the torn o-ring wedges between the bolt and body. what's worse, is having to wrestle that o-ring back on. any of you who have/had an old RT understand my pain (and also why agd took out the banjo bolt on the newer RT's). anyways, i've been tuning the lvl-10 bolt, and i don't think my fingers can take many more o-ring replacements. if any of you have had this problem, or a suggestion as to why it keeps happening, any input is greatly appreciated. thanks in advance! [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Automags ]