Posted by: Tom Sparkman on November 08, 2003 at 19:47:14

: I just got my maxflow gassed up and i put a remote on and screwed it on my gun. When i turned it on it blew out my gauge and also blew a hole in my remote. My maxflow is a old high pressure one. Why would it blow the gauge and remote? Any help is good. Sounds like the output pressure is too high. If it was a standard 1200psi gauge that blew, I'd have and airsmith look at the system before trying to just replace the gauge and hose - it could be outputting way too much pressure, which can be very dangerous. Tom

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : I just got my maxflow gassed up and i put a remote on and screwed it on my gun. When i turned it on it blew out my gauge and also blew a hole in my remote. My maxflow is a old high pressure one. Why would it blow the gauge and remote? Any help is good. : Sounds like the output pressure is too high. If it was a standard 1200psi gauge that blew, I'd have and airsmith look at the system before trying to just replace the gauge and hose - it could be outputting way too much pressure, which can be very dangerous. : Tom [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]