|
|
|
|
|
|
|
Posted by sam "goldie" smock on June 25, 2001 at 10:25:43:
In Reply to: Re: defiant locking up? posted by
It sounds mostly like it's that you're chopping balls. There's a couple other things to try though. 2. Try turning your lpr up slightly. Maybe 1/8 turn. 3. It could be that your solenoid is getting screwy. You may want to take it apart and lube it up. BUT ONLY DO IT IF YOU KNOW WHAT YOU ARE DOING. If you haven't messed with small electronics stuff before, leave it alone. There are many small parts that have to be reassembled a correct way.
1. Make sure your ball detent is adjusted properly. If it's screwed all the way in, it could be locking the bolt up.
Subject:Message:
| Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |