WARPIG Tech Talk - Spyder - RE: Hellrazor, Got a few Q's for ya


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Spyder
RE: Hellrazor, Got a few Q's for ya

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]

Posted by Hellrazor on August 22, 2002 at 02:52:55:

In Reply to: Hellrazor, Got a few Q's for ya posted by Steve on August 21, 2002 at 01:52:19:

: I tried the screw thing and I haven't noticed any other wear but the scratches are both above and below the milling on the bolt. Are there replacement (aftermarket, Delrin, self lubing...) bolts for the AMG? Also, I go through air like I've never seen before with my AMG. Is there anything I can do to the internals (valves, etc...) that I could replace to lower the op pressure? Would a LP chamber help? I live pretty close to BC paintball and JC and the guys are pretty good with helping me do the tech stuff, but when I ask them about this stuff, they just say do what I want. Also, I'm really interested with the trigger shortening you did with buying the smaller switch and stuff. How can I do that to my AMG? Did you get the Vision eye thing finished for your spyder? If so, How can I get that upgrade? I know it's a lot of questions, but I shoot a cocker as a main gun and an AMG for a back up. I'm trying to get the AMG to be as effective as my cocker on air, and an Angel like trigger pull would be so sweet.

So far as I know, the AMG uses standard spyder bolts. Unless they are screwing with my head and making changes on me. There is tons of things you can do to modify the internals. You can polish them, you can replace the valve for lower op pressure, a shocktech LPC is massive, really. Shadow_walker is getting one on his spyder, and it should help a little. All it does is act as a resevior for the valve to draw air from. If it is bigger, you get less chance of shootdown, which is also the ASA. I know SW is trying to replace just about everything on his gun. I wouldn't fool with the electronics just yet, just because we still have to do it ourselves. We're still working on the ACE, we'll post it up when we get everything working great. How long is your trigger pull now? Because you can simply adjust the set screw on top of the trigger to shorten it. If you unscrew it too far, it'll depress the switch and it won't reset. So make sure you don't do that. Hope that helps. Hellrazor out.

Follow Ups:

Re: RE: Hellrazor, Got a few Q's for ya Steve "B-Ski" Biedrzycki 13:46:06 08/22/02 (3)
- Re: RE: Hellrazor, Got a few Q's for ya Hellrazor 14:22:07 08/22/02 (2)
  - Re: RE: Hellrazor, Got a few Q's for ya Steve "B-Ski" Biedrzycki 23:30:08 08/22/02 (1)
    - Re: RE: Hellrazor, Got a few Q's for ya Hellrazor
      00:55:22 08/23/02 (0)

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: : I tried the screw thing and I haven't noticed any other wear but the scratches are both above and below the milling on the bolt. Are there replacement (aftermarket, Delrin, self lubing...) bolts for the AMG? Also, I go through air like I've never seen before with my AMG. Is there anything I can do to the internals (valves, etc...) that I could replace to lower the op pressure? Would a LP chamber help? I live pretty close to BC paintball and JC and the guys are pretty good with helping me do the tech stuff, but when I ask them about this stuff, they just say do what I want. Also, I'm really interested with the trigger shortening you did with buying the smaller switch and stuff. How can I do that to my AMG? Did you get the Vision eye thing finished for your spyder? If so, How can I get that upgrade? I know it's a lot of questions, but I shoot a cocker as a main gun and an AMG for a back up. I'm trying to get the AMG to be as effective as my cocker on air, and an Angel like trigger pull would be so sweet. : So far as I know, the AMG uses standard spyder bolts. Unless they are screwing with my head and making changes on me. There is tons of things you can do to modify the internals. You can polish them, you can replace the valve for lower op pressure, a shocktech LPC is massive, really. Shadow_walker is getting one on his spyder, and it should help a little. All it does is act as a resevior for the valve to draw air from. If it is bigger, you get less chance of shootdown, which is also the ASA. I know SW is trying to replace just about everything on his gun. I wouldn't fool with the electronics just yet, just because we still have to do it ourselves. We're still working on the ACE, we'll post it up when we get everything working great. How long is your trigger pull now? Because you can simply adjust the set screw on top of the trigger to shorten it. If you unscrew it too far, it'll depress the switch and it won't reset. So make sure you don't do that. Hope that helps. Hellrazor out.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.