Posted by: Jasleth on April 30, 2003 at 12:34:27

sounds like your pump arm is in need of adjustment - there is a small hex nut that helps position your pump on the pump rod. That nut is probably what is beating the hell out of the receiver. your pump rod should engage so that the nut ends up being NEAR the receiver but not eating into it. some small amount of receiver eating is normal wear and tear but large amounts indicate you need to adjust it. when you tighten/adjust it you will probably see the slop go away also. Jasleth

Follow Ups: I have the same problem maybe someone can help>>> _The Hare_ 01:38:09 05/01/03 (3) Re: I have the same problem maybe someone can help>>> Kamikaze1 21:32:42 05/01/03 (2) I fixed it... Back2it 00:53:39 05/02/03 (1) She just needed a good field strippin') (NT) _The Hare_ 02:28:58 05/02/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : sounds like your pump arm is in need of adjustment - there is a small hex nut that helps position your pump on the pump rod. That nut is probably what is beating the hell out of the receiver. : your pump rod should engage so that the nut ends up being NEAR the receiver but not eating into it. some small amount of receiver eating is normal wear and tear but large amounts indicate you need to adjust it. : when you tighten/adjust it you will probably see the slop go away also. : Jasleth [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Stock/Pump ]