Posted by: Sixpack440 on December 13, 2002 at 01:18:40

OK, I'm new to timing my cocker, and a bit lost... When I pull the trigger, it will not recock. I can cock it by hand and it fires fine, but it fires then theres alot of trigger pull, then the ram cycles, and it doesn't go back far enough to recock. I have a KAPP reflex frame and 3 way I just installed. It worked great after I installed them, and used it for a few games, then I put it away. When I cleaned it I just removed the bolt, cleaned, reoiled, test fired a few times (fine), but now a week later its off.

Follow Ups: Before you screw up you timing... BodyByHostess 10:54:15 12/13/02 (0) Turn up your front reg pressure... John_(Cocker_Owners_Group_#82) 04:20:45 12/13/02 (1) Re: Turn up your front reg pressure... tamu 10:31:24 01/15/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : OK, I'm new to timing my cocker, and a bit lost... : When I pull the trigger, it will not recock. I can cock it by hand and it fires fine, but it fires then theres alot of trigger pull, then the ram cycles, and it doesn't go back far enough to recock. : I have a KAPP reflex frame and 3 way I just installed. It worked great after I installed them, and used it for a few games, then I put it away. When I cleaned it I just removed the bolt, cleaned, reoiled, test fired a few times (fine), but now a week later its off. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]