Posted by: BodyByHostess on February 03, 2003 at 16:11:47

It sounds to me like your valve is fully open (including duration) with your current setup. If that's true, then switching to a heavier hammer spring will only keep the valve open longer than necessary. That being said, it's possible that with your current configuration the valve is open too long. I'd try using the light hammer spring, but going to a heavier valve spring and see what that does.

Follow Ups: Re: Your turn to help me. I'm baffeled... Dale "Head_Hunters" DuPont 12:47:13 02/05/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : It sounds to me like your valve is fully open (including duration) with your current setup. If that's true, then switching to a heavier hammer spring will only keep the valve open longer than necessary. : That being said, it's possible that with your current configuration the valve is open too long. : I'd try using the light hammer spring, but going to a heavier valve spring and see what that does. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]