Posted by: Razorpb on May 22, 2003 at 18:42:27

Don't be concerned about breaking your inserts, there's nothing fragile about them, don't play catch with them, step on them, or throw them at anything hard and you won't have a problem. I pull out the insert, running hot water through everything helps alot, wash them out good and run a pull through squeege through em, just like cleaning a regular barrel. Put a drop of oil on your finger and rub it on the orings on the back end, assemble and your ready to rock. Hope it helps. Razor : yea be very carefull with the inserts cuz they are made of very thin aluminum and they will break, to clean i would say remove the insert and wipe it off and just use a battle swab to clean your barrel or whatever you have, sumtimes i use water : hope it helps

Follow Ups: Re: Cleaning a Freak?? Jason "Zippy" Finnie 14:27:35 05/23/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : Don't be concerned about breaking your inserts, there's nothing fragile about them, don't play catch with them, step on them, or throw them at anything hard and you won't have a problem. I pull out the insert, running hot water through everything helps alot, wash them out good and run a pull through squeege through em, just like cleaning a regular barrel. Put a drop of oil on your finger and rub it on the orings on the back end, assemble and your ready to rock. Hope it helps. : Razor : : : yea be very carefull with the inserts cuz they are made of very thin aluminum and they will break, to clean i would say remove the insert and wipe it off and just use a battle swab to clean your barrel or whatever you have, sumtimes i use water : : hope it helps [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]