Posted by: K Keaty on May 23, 2003 at 16:17:41

Although there are other decent places to go, I like www.paintballravi.com. Read the autococker infosheet for a very good outline of how the cocker works and how to take care of it, including setting one up from scratch. Truthfully, once it's set up, it doesn't require much. Velocity can be changed with a 3/16" hex wrench. Remove the cocking rod from the rear of the marker, and you'll see the hole for the wrench. Clockwise is up, and counterclockwise is down. Hope this helps. Kevin : OK, I sorta just got my outkast---its on its way back to the store, because the frame was scratched up....but should have another new one next week... : anyways, all ive played with previous to this was a model 98, and that obviously required virtually no maintenance. i know the cocker will be different. and i was hoping folks could answer a few questions, without flaming me for the dumb questions.... : first, is the autococker trix video worth it, or is there a better owners manual for it that i could use? : second, i know with the m98, increasing/reducing FPS was easy---i didnt stare at the cocker long enough, but how hard/easy is it to change FPS? : i figured the cocker video might be good for a noob like me, but i dont want to waste money if there are better things available.... : id ask the guys i play with, but all but one shoots an angel, so they arent very knowledgeable about cockers, except to tell me that once its working, dont mess with it : thanks for the help

Follow Ups: Re: Free cocker resource Phil "Skulman" Land 12:45:21 05/30/03 (0) Re: Free cocker resource rodman 23:24:38 05/23/03 (3) Re: Free cocker resource baron_thrash 14:14:53 05/24/03 (2) Re: Free cocker resource john "rodman" deegan 17:03:39 05/25/03 (1) Re: Free cocker resource Razorpb 15:04:43 05/27/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : Although there are other decent places to go, I like www.paintballravi.com. Read the autococker infosheet for a very good outline of how the cocker works and how to take care of it, including setting one up from scratch. Truthfully, once it's set up, it doesn't require much. Velocity can be changed with a 3/16" hex wrench. Remove the cocking rod from the rear of the marker, and you'll see the hole for the wrench. Clockwise is up, and counterclockwise is down. Hope this helps. : Kevin : : OK, I sorta just got my outkast---its on its way back to the store, because the frame was scratched up....but should have another new one next week... : : anyways, all ive played with previous to this was a model 98, and that obviously required virtually no maintenance. i know the cocker will be different. and i was hoping folks could answer a few questions, without flaming me for the dumb questions.... : : first, is the autococker trix video worth it, or is there a better owners manual for it that i could use? : : second, i know with the m98, increasing/reducing FPS was easy---i didnt stare at the cocker long enough, but how hard/easy is it to change FPS? : : i figured the cocker video might be good for a noob like me, but i dont want to waste money if there are better things available.... : : id ask the guys i play with, but all but one shoots an angel, so they arent very knowledgeable about cockers, except to tell me that once its working, dont mess with it : : thanks for the help [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]