HomePicturesTechnicalTournamentCalendarRecreationalFieldsStoresClassified AdsAuctionsBeginner InfoNews And ArticlesLinksForumsResourcesVideoContact UsSearch
Email This Page
|
| |
| HomePicturesTechnicalTournamentCalendarRecreationalFieldsStoresClassified AdsAuctions |
|
| Beginner InfoNews And ArticlesLinksForumsResourcesVideoContact UsSearch |
|
Email This Page |
|
Product Testing performed with DraXxus Paintballs
What
do you think?
|
Tippmann X7 Features HowItWorks Disassembly Adjustment Testing Data
Continute to Testing .
|
With only one main adjustment – velocity – the X7 is simple to set up and use. Like the A5, the X7's velocity adjuster is located on the right hand side of the marker. A hex-head screw is accessible through an opening in the right side receiver half, just above the gas piston which drives the Cyclone feeder. Turning the adjuster screw clockwise drives the screw inward, causing it to further interfere with the flow of gas through the X7 power tube, reducing velocity. Anti-clockwise rotation backs the screw out, opening up the gas path, which is done to increase the velocity.