Posted by: Back2it on April 29, 2003 at 20:25:26

Just a few questions i have about my phantom. -I have never replaced the mainspring in the gun, and now, i notice some slop in the trigger pull. Does this mean its time for a new spring, and what effect does the main spring have on the gun. -I recently looked at my gun's internals and such while cleaning, and noticed that on the trigger frame, the slot where the pump arm goes has been hit pretty hard and the metal has been sort of dented up from all of the pump strokes hitting the end of their travel. Does this mean i am pumping too hard, is this normal? If so, does it hurt anything? thanks all! -Perry

Follow Ups: sorry correction Back2it 22:24:59 04/29/03 (5) phantom pump arm/nut Jasleth 12:34:27 04/30/03 (4) I have the same problem maybe someone can help>>> _The Hare_ 01:38:09 05/01/03 (3) Re: I have the same problem maybe someone can help>>> Kamikaze1 21:32:42 05/01/03 (2) I fixed it... Back2it 00:53:39 05/02/03 (1) She just needed a good field strippin') (NT) _The Hare_ 02:28:58 05/02/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : Just a few questions i have about my phantom. : -I have never replaced the mainspring in the gun, and now, i notice some slop in the trigger pull. Does this mean its time for a new spring, and what effect does the main spring have on the gun. : -I recently looked at my gun's internals and such while cleaning, and noticed that on the trigger frame, the slot where the pump arm goes has been hit pretty hard and the metal has been sort of dented up from all of the pump strokes hitting the end of their travel. Does this mean i am pumping too hard, is this normal? If so, does it hurt anything? thanks all! : -Perry [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Stock/Pump ]